This compressor is BRAND New (2015). As soon as purchase information becomes available I'll post it here. For now, here's a link to the specs on the TS-5 compressor.
http://www.bendpak.com/TS-5-Elite-Air-Compressor-BendPak.pdf
BendPak was able to hook me up with one of their prototype air compressors, the 80 gallon TS-5.
**Note** many of the issues I pointed out in the video have been addressed and corrected. As I mentioned the unit that I have was a prototype. BendPak took my feedback and used it to correct those issues.
The TS-5 has a 5hp electric motor and a cast iron 2 stage pump. It fills from empty in just over 6min. It's one bad mamajamma. My 25 gallon did well for a time, but now that I'm in the new shop, it was time to upgrade to a 'big boy' system. Between the new compressor, and the 3/4" black iron pipe and fittings my land lord gave me, I'll never want for compressed air again. Sure, the compressor kicks on when I use my air tools, but the pressure never drops and my air tools are working better than ever as a result. Strangely, it's also quieter than my old 25 gallon unit.
I didn't run a chiller/dryer on this system and I'm sure that some of you will have issue with that. However, I haven't had ANY issues with moisture in the lines. In fact, my moisture traps have never had any water in them. I drain the tank every evening and that seems to be sufficient.
Pipe repair video: http://www.ericthecarguy.com/exclusive-videos/73-exclusive-videos/1286-etcg-s-air-system-repair-with-a-lesson-in-pipe-fitting-exclusive-video
Here's a list of accessories.
WSA-100 (Electric and compressed air station): http://www.bendpak.com/car-lifts/accessories/wsa-100.aspx
Vibration pads: http://www.bendpak.com/car-lifts/accessories/anti-vibration-pads.aspx
Tire Inflator: http://www.jbtoolsales.com/astro-pneumatic-3081-dial-tire-inflator#oid=1002_1
Air hose: http://www.jbtoolsales.com/good-year-46565-1-2-x-50-yellow-air-hose#oid=1002_1
Filter/Regulator: http://www.jbtoolsales.com/atd-tools-7790-filter-regulator-combination-unit#oid=1002_1
Oil recommendations
http://www.ebay.com/itm/like/151716919003?lpid=82&chn=ps
https://aircompressorservices.com/mobil-5-gallon-synthetic-oil-replacement-rarus-824.html?gclid=CLKk8Oqx0cYCFQeLaQodOHMI8Q
The oil I used
http://www.pennzoil.com/wp-content/uploads/2014/04/Pennzoil-Ultra-Platinum-0W-40-SN-Chrysler-en-TDS.pdf
Tool reviews posted every other Wednesday.
Camera: Brian Kast
Thanks for watching!
Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/59687-bendpak-ts-5-air-compressor-air-system#145839
Related Videos
Compressor repair: https://www.youtube.com/watch?v=7Zz9SKSHxFg
ETCG's Old compressor and air tools: https://www.youtube.com/watch?v=D5EvLuIWalI
Useful articles.
Engine overheat: http://www.ericthecarguy.com/faq/what-to-do-when-your-engine-overheats
No start problems: http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems
Idle issues: http://www.ericthecarguy.com/faq/solving-automotive-idle-problems
Performance issues: http://www.ericthecarguy.com/faq/solving-automotive-performance-issues
Diagnosing Noises: http://www.ericthecarguy.com/faq/diagnosing-noises-in-your-car
Diagnosing Vibrations: http://www.ericthecarguy.com/faq/determining-the-causes-of-vehicle-vibrations
Electrical Problems: http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems
Brake Issues: http://www.ericthecarguy.com/faq/solving-brake-problems
Transmission issues: http://www.ericthecarguy.com/faq/solving-transmission-problems
HVAC problems: http://www.ericthecarguy.com/faq/solving-automotive-hvac-problems
Leaks: http://www.ericthecarguy.com/faq/finding-and-fixing-leaks
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Instagram: http://instagram.com/ericthecarguy
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
http://www.bendpak.com/TS-5-Elite-Air-Compressor-BendPak.pdf
BendPak was able to hook me up with one of their prototype air compressors, the 80 gallon TS-5.
**Note** many of the issues I pointed out in the video have been addressed and corrected. As I mentioned the unit that I have was a prototype. BendPak took my feedback and used it to correct those issues.
The TS-5 has a 5hp electric motor and a cast iron 2 stage pump. It fills from empty in just over 6min. It's one bad mamajamma. My 25 gallon did well for a time, but now that I'm in the new shop, it was time to upgrade to a 'big boy' system. Between the new compressor, and the 3/4" black iron pipe and fittings my land lord gave me, I'll never want for compressed air again. Sure, the compressor kicks on when I use my air tools, but the pressure never drops and my air tools are working better than ever as a result. Strangely, it's also quieter than my old 25 gallon unit.
I didn't run a chiller/dryer on this system and I'm sure that some of you will have issue with that. However, I haven't had ANY issues with moisture in the lines. In fact, my moisture traps have never had any water in them. I drain the tank every evening and that seems to be sufficient.
Pipe repair video: http://www.ericthecarguy.com/exclusive-videos/73-exclusive-videos/1286-etcg-s-air-system-repair-with-a-lesson-in-pipe-fitting-exclusive-video
Here's a list of accessories.
WSA-100 (Electric and compressed air station): http://www.bendpak.com/car-lifts/accessories/wsa-100.aspx
Vibration pads: http://www.bendpak.com/car-lifts/accessories/anti-vibration-pads.aspx
Tire Inflator: http://www.jbtoolsales.com/astro-pneumatic-3081-dial-tire-inflator#oid=1002_1
Air hose: http://www.jbtoolsales.com/good-year-46565-1-2-x-50-yellow-air-hose#oid=1002_1
Filter/Regulator: http://www.jbtoolsales.com/atd-tools-7790-filter-regulator-combination-unit#oid=1002_1
Oil recommendations
http://www.ebay.com/itm/like/151716919003?lpid=82&chn=ps
https://aircompressorservices.com/mobil-5-gallon-synthetic-oil-replacement-rarus-824.html?gclid=CLKk8Oqx0cYCFQeLaQodOHMI8Q
The oil I used
http://www.pennzoil.com/wp-content/uploads/2014/04/Pennzoil-Ultra-Platinum-0W-40-SN-Chrysler-en-TDS.pdf
Tool reviews posted every other Wednesday.
Camera: Brian Kast
Thanks for watching!
Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/59687-bendpak-ts-5-air-compressor-air-system#145839
Related Videos
Compressor repair: https://www.youtube.com/watch?v=7Zz9SKSHxFg
ETCG's Old compressor and air tools: https://www.youtube.com/watch?v=D5EvLuIWalI
Useful articles.
Engine overheat: http://www.ericthecarguy.com/faq/what-to-do-when-your-engine-overheats
No start problems: http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems
Idle issues: http://www.ericthecarguy.com/faq/solving-automotive-idle-problems
Performance issues: http://www.ericthecarguy.com/faq/solving-automotive-performance-issues
Diagnosing Noises: http://www.ericthecarguy.com/faq/diagnosing-noises-in-your-car
Diagnosing Vibrations: http://www.ericthecarguy.com/faq/determining-the-causes-of-vehicle-vibrations
Electrical Problems: http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems
Brake Issues: http://www.ericthecarguy.com/faq/solving-brake-problems
Transmission issues: http://www.ericthecarguy.com/faq/solving-transmission-problems
HVAC problems: http://www.ericthecarguy.com/faq/solving-automotive-hvac-problems
Leaks: http://www.ericthecarguy.com/faq/finding-and-fixing-leaks
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Instagram: http://instagram.com/ericthecarguy
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
- Category
- Autos & Vehicles
Comments