Stage 3: 2010-2012 Shelby GT500 Bolt-On Build-Up - AmericanMuscle.com

We just built a 2010-2012 Shelby GT500 Mustang with close to 600HP at the tires! Be sure to watch all 3 Stages at http://www.americanmuscle.com/10-12-shelby-gt500-build.html

In the third Stage of our GT500 Bolt-On Build-Up, we installed:

Ford Racing Twin 65mm Cobra Jet Throttle Body (07-14 GT500) - http://www.americanmuscle.com/frpp-cobrajet-65mm-tb-0714gt500.html

Magnaflow Street Axle-back Exhaust (11-12 GT, 11-12 GT500) - http://www.americanmuscle.com/magnaflow-street-axleback-2011gt.html

Magnaflow Axle-back Exhaust (10 GT, GT500) - http://www.americanmuscle.com/magnaflow-axleback-2010gt.html

Gates 10-Rib Serpentine Belt - 85-7/8 in. (07-14 GT500) - http://www.americanmuscle.com/gates-serpentine-belt-0714gt500.html

Innovators West 10% Overdrive Harmonic Balancer Pulley (07-14 GT500) - http://www.americanmuscle.com/overdrive-harmonic-balancer-gt500.html

AFCO Pro-Series Heat Exchanger w/ Fans (07-12 GT500) - http://www.americanmuscle.com/afco-proxchanger-fans-0712gt500.html

Stainless Works Off-Road X-Pipe (11-14 GT500) - http://www.americanmuscle.com/stainlessworks-offroad-xpipe-1114gt500.html

In Stage 3, our 2012 Shelby GT500 threw down over 589 HP to the tires and over 600 TQ. That's huge gains from our stock numbers of 503 HP and 475 TQ. After the Bama Performance team loaded up their custom tunes over all of these mods, the gains were over 117 HP and 135 TQ throughout the curve as measured on our Dynojet 224xLC!

We're about to build a 2013-2014 Shelby GT500 next. COMMENT below and tell us your favorite mods on this video and what you want to see us do with the 2013-2014 next...